Procon Controls
Procon Controls
Thettipalayam, Coimbatore, Tamil Nadu
SEND SMS
SEND EMAIL

Chokes And Inductors


We provide a range of AC Reactor Chokes (1 Phase & 3 Phase) & DC Chokes which is developed using optimum Copper Wires Terminal Blocks. Available in single and three phases; our range is widely catered to clients spread across the globe Custom Designed Chokes is commonly used as power supply filter. These are developed using excellent quality Electrical Steel Lamination and Copper Wires Terminal Blocks. We are exporting our products across the world.

Application Areas :

  • Line & Load di / dt protection in Variable Frequency Drives
  • Impedance matching with 3%, 5% & 7%
  • Carrier Frequency range from 5kHz to 18 kHz & Fundamental frequency range from 30Hz to 150Hz for speed & torque control in VFD''s
  • All make VFD''s - Yasakawa, Mitsubhishi. Danfoss, LG, Fuji, Control Techniques, Allan Bradlley, ABB, Siemens, Delta etc.,

Power Line Reactors

Power Line Reactors
  • Power Line Reactors
Ask For Price
Power Line Reactors : These chokes are used for smoothening the surge current to the load like thyristor drives, Variable Frequency drive, Servo Drives, Robotic controllers and various power electronic modules. In variable frequency drives, the line reactors are used for line and load di /dt protection along with controlling the speed and torque

Features :

  • Oppose rapid changes in current
  • Attenuate spikes of current
  • Limit peak currents
  • Suitable for electronic variable speed drive
  • Extra protection to Ac and DC drives
  • Reduce harmonic distortion in the input line current
  • Ensure no damage to input rectifiers from in-rush current
Applications :

  • Power electronics
  • Variable speed drives of Mitsubhishi. Yasakawa, LG, Danfoss, Control Techniques, Fuji, ABB, Allan Bradlley, Delta and Siemens
  • Thyristor drives
  • Robotic controllers
  • Servo drives



Request
Callback
Yes! I am interested

Harmonic Mitigation Chokes

Harmonic Mitigation Chokes
  • Harmonic Mitigation Chokes
Ask For Price
Harmonic Mitigation Chokes : These chokes are normally three phase with air gap which will act as a integrated choke which will offer additional inductance and di / dt to the load. The throw back of harmonics generated by the power electronics devices are mitigated by the unique “TransChoke”.
Harmonic Mitigation Chokes are the cost effective solution for minimizing the presence of harmonics in the electrical systems. These are basically available in three phases.

Features :

  • Reduces the harmonics in electrical systems
  • Available with three phases
  • Ensure extra inductance
  • Di/dt protection to load
  • Reduces operations and maintenance costs
  • Load side surge suppression

Applications :

  • Line & Load applications
  • Di / dt Protection Systems
  • 50 Hz to > 5 kHz VFD's
  • Process plants with output (load) chokes
  • 3%, 5% & 7% Impedance
  • Submersible pumps in oil well
  • VFD's - Yasakawa, Mitsubhishi, Siemens, Allan Bradlley, ABB, Fuji, Danfoss, LG and Control Techniques
Request
Callback
Yes! I am interested

AC Reactor Chokes

AC Reactor Chokes
  • AC Reactor Chokes
Ask For Price

Product Details:

Start MethodPulse Start
Ballast TypeFluorescent Ballasts
CertificationISI

AC Reactor Chokes : These chokes are installed input (Line) & output (Load) side of variable frequency drives to have di/dt, impedance matching & harmonic mitigation. With these chokes the protection against the surge, transient voltage & noise to the drives are ensured. The output chokes are installed for the longer cable lengths application for example distance from drive to the load if it exceeds 25 meters. Many application like submersible pumps in Oil well, process plants needs the output (Load) chokes.

Features :

  • Long functional life
  • Safe to use
  • Sturdy design
  • High performance
  • Ability to reduce the current and voltage stresses on the input rectifier bridge
  • Over-voltage restriction
  • Available in single and three phases
  • Better protection of the drive
  • Improvement of low-frequency conduction emission and sensitivity

Applications :

  • 3%, 5% & 7% Impedance
  • Di / dt Protection Systems
  • 50 Hz to > 5 kHz VFD's
  • Line & Load applications
  • Submersible pumps in oil well
  • Process plants with output (load) chokes
  • VFD's - Yasakawa, Mitsubhishi, Siemens, Allan Bradlley, ABB, Fuji, Danfoss, LG and Control Techniques

We are exporting our products across the world.
Request
Callback
Yes! I am interested

DC Chokes

DC Chokes
  • DC Chokes
Ask For Price
DC Chokes : These chokes are used for DC bus for AC ripple reduction for medium & large machines and power systems. The laminations used in these products are Electrical grade CRGO with low loss. Our prudently designed DC Chokes are suitably utilized in industrial machinery power systems for filtering the power supply. These chokes are made sturdily by making use of optimum grade copper wires terminal blocks and electrical steel laminations

Features :

  • Excellent power filtration
  • Make sure no damage to input rectifiers from in-rush current
  • Improvise low frequency conduction emission
  • Overload protection
  • Reduce current-voltage stress
  • Excellent protection to motor drive
  • Lowers harmonic distortion
  • Compacted design

Applications :

  • Power Electronic Systems
  • Rectifier Modules
  • Servo Drives
  • DC Bus Systems
  • Di / dt Smoothening units
  • AC Ripple Reduction Systems


We are exporting our products across the world.
Request
Callback
Yes! I am interested

VFD Line & Load Chokes

VFD Line & Load Chokes
  • VFD Line & Load Chokes
Ask For Price

Product Details:

ApplicationPower Generation, Industrial Facilities

VFD Line & Load Chokes : These chokes are installed input (Line) & output (Load) side of variable frequency drives to have di/dt, impedance matching & harmonic mitigation. With these chokes the protection against the surge, transient voltage & noise to the drives are ensured. The output chokes are installed for the longer cable lengths application for example distance from drive to the load if it exceeds 25 meters. Many application like submersible pumps in Oil well, process plants needs the output (Load) chokes. The mounting geometry can be Foot or Flange mount with natural or forced air cooling.

Features :

  • Can be installed on both input and output side of VFD
  • Di/dt protection
  • Offer impedance matching and harmonic mitigation
  • Complete protection to drive from transient voltage, noise and surge currents
  • Lowers the cable length requirement from drive to load
  • Can be foot or flange mounted
  • Option of natural or forced air cooling

Applications :

  • Process plants that require the output (load) chokes
  • Submersible pumps in oil well
  • Line & Load applications
  • VFD's - Yasakawa, Mitsubhishi, Siemens, Allan Bradlley, ABB, Fuji, Danfoss, LG and Control Techniques
  • 50 Hz to > 5 kHz VFD's
  • Process plants with output (load) chokes
  • 3%, 5% & 7% Impedance
  • Di / dt Protection Systems
Request
Callback
Yes! I am interested

High Frequency Inductors

High Frequency Inductors
  • High Frequency Inductors
Ask For Price
We are Leading Manufacturer ,Supplier and exporter Of High Frequency Inductors and Lamination Transformers, Ultra Isolation Transformers, Buck Boost Transformers, Cast Resin Transformer, Control Panel Transformers, Dry Run TransformersHigh Frequency Transformers, Single Phase Transformer, Custom Designed Transformers, Two Phase Transformers, Three Phase Transformers, EI Lamination & Wound Core Transformers and Import Substitute Transformers
Request
Callback
Yes! I am interested
X
Looking for “Chokes And Inductors”?


Reach Us
T. Ram Prakash (Partner)
4/131, Thettipalayam School Road, Thettipalayam
Coimbatore- 641010, Tamil Nadu, India


Call Us

Send E-mail

Send SMS